TDS-3TDS-3
WHAT IS TDS?
Total Dissolved Solids(TDS) are the total weight of all solids
(minerals, salts, or metals ) that are dissolved in a given volume
of water, express in milligrams per liter(mg/L), or In parts per
million (PPM).
The lower the TDS level in the water, the more efficiently your
body’s cells actually get hydrated by the water you drink.
The higher the TDS level in the water, the greater the probability
of harmful contaminants that can pose health risks of hinder the
absorption of water molecules on the cellular level
The EPA’S maximum contaminant levels of TDS in secondary drinking
water is 500mg/L(500PPPM)
USE THE TDS METER TO:
*Check the performance of your water filter
*Check for hardness (1grain=17ppm)
*Make sure you always drink pure water!
FEATURES
Hold function: Saves measurements for convenient reading and
recording.
Auto-off function: Turns off meter after 10 minutes of non-use to
conserve batteries. Dual Range: Measures from 0-999ppm, with a
resolution is 10ppm, indicated by drinking x10image, Factory
calibrated.
Range: 0-9990ppm
Accuracy: +/-2%
Battery: 2x1.5V(Button Cell)
Size: 140x23x15mm(5.5x0.9x0.55in)
Weight:32g(1.13oz)
THREE YEAR LIMITED WARRANTY
This product is warranted to the purchaser against material and
workmanship for three years form the date of purchase.
What is covered: Reparts and labor. or replacement at the company’s
option.
Transportation charges to the purchaser
What is not covered: Transportation charges to the company. Damages
from abuse or improper maintenance, see operating instructions and
precaution.
Any other consequential damages, incidental damages, or incidental
expenses, including damages to property. Some states do not allow
the exclusive or limitation of incidental or consequential damages,
so the above limitation or exclusion may not apply to you.
Implied Warranties
Any implied warranties, including implied warranties of
merchantability and fitness for a particular purchase, are limited
in duration to three years form the date of purchase. Some states
do not allow limitation on how long an implied warranty lasts, so
the above limitation may not apply to you.
To the extent any provision of this warranty is prohibited by
federal and state law and cannot be preempted, it shall not be
applicable. This warranty gives you specific legal rights, and you
may also have other rights, which very from state to state.,
Instructions for the TDS meter
1. Remove the protective cap.
2. Turn the TDS Meter on.
3. Turn the meter into the water/solution up to the maximum
immersion level (2”).
4. Waiting until the display stabilizes, The TDS meter
automatically compensates for temperature variations Once the
readout is stabilized (30 to 45 seconds). Press the hold button to
save reading.
5. After usage, shake off water from your meter of wipe it with a
tissue.
Precautions
Do not drop the entire TDS meter in water or dip beyond the maximum
immersion level. This unit is not water-tight and is not covered
under the warranty is water enters the unit.
Do not store the TDS meter under high temperature or direct
sunlight. This will shorten the the life-span of the product and
potentially void the warranty.
The TDS-3 is calibrated at 90ppm. It is recommended that the
calibration level be as close as possible to sample to be tested.
If you are testing higher ppm (Member, water quality association)
